Top Level > Clear Heatshrink 2:1 Ratio

9.5mm Diameter  Clear Heatshrink

9.5mm Diameter Clear Heatshrink

£1.24

Clear Heatshrink 9.5mm Diameter x 1m

:  at  £1.24  each

14 in stock.
 
Supplied in 1 metre lengths
Shrink ratio 2:1
Shrinking temperature +80ºc
Made from polyolefin
Excellent flexibility and insulation
Excellent flame retardent properties
Temperature range -55°c to +125°c
UL approved
9.5mm is the internal diameter before shrinking
Purchase more than 1 length and it will be supplied in one continuous length
Weight per 1m length: 12grms
  
Heatshrink Measurements:
D = Diameter
F= Lay Flat Measurement

9.5mm

 

Inner Diameter mm
Wall Thickness As Supplied mm
Wall Thickness After Recovery mm
1.0mm
0.15 +/- 0.05
0.22 +/- 0.10
1.6mm
0.15 +/- 0.05
0.28 +/- 0.10
2.4mm
0.18 +/- 0.05
0.35 +/- 0.10
3.2mm
0.18 +/- 0.05
0.40 +/- 0.10
4.8mm
0.25 +/- 0.05
0.50 +/- 0.10
6.4mm
0.28 +/- 0.05
0.55 +/- 0.10
9.5mm
0.30 +/- 0.08
0.60 +/- 0.10
12.7mm
0.30 +/- 0.08
0.60 +/- 0.10
19.1mm
0.40 +/- 0.15
0.80 +/- 0.15
25.4mm
0.55 +/- 0.15
0.90 +/- 0.15
38.1mm
0.55 +/- 0.15
1.00 +/- 0.15
50.8mm
0.60 +/- 0.18
1.00 +/- 0.15
76mm
0.70 +/- 0.20
1.46 +/- 0.20
102mm
0.70 +/- 0.20
1.46 +/- 0.20
127mm
0.70 +/- 0.20
1.56 +/- 0.25
152mm
0.80 +/- 0.25
1.66 +/- 0.25
178mm
0.80 +/- 0.25
1.66 +/- 0.25

Technical Data
 Property
Test Method
Typical Data
Tensile Strength
ASTM D 2671
14MPa
Ultimate Elongation (%)
ASTM D 2671
450
Longitudinal Shrinkage (%)
UL 224
+/- 5
Heat Aging
Tensile Strength
Ultimate Elongation (%)
 
158¡É, 168hr
 
11MPa
300
Flammability
UL224 VW-1
Pass
Heat shock (250¡É, 4hrs)
ASTM D 2671
No cracking
Cold bend tests (-55¡É, 4hrs)
ASTM D 2671
No cracking
Dielectric Strength (kv/mm)
ASTM D 150
20
Volume Resistivity (ohm-cm)
ASTM D 876
1x1014
Copper Stability
UL224
Pass